Powerfully revives wood

Prepares new wood for coating

Removes stubborn stains

Coverage Calculator

FEATURES OF CUTEK® WOOD REVIVER

  • POWERFULLY RESTORES WOOD
    Brings weathered, grayed/silvered wood back to original appearance
  • REMOVES STUBBORN STAINS
    Such as iron stains, water marks, tannins, resins, mold and fungus
  • PREPARES NEW WOOD FOR COATING
    Removes common invisible glaze (‘mill glaze’) from newly sawn wood or machined wood

TYPICAL USES

  • Restoration of stained or high traffic areas such as decks, docks, boardwalks, etc.
  • Rejuvenation of external and weather affected or grayed wood such as decking, cladding, fences, shingles, etc.

CUTEK® Wood Reviver will not remove paint and wood coatings from your wood. In these instances, remove with CUTEK® Wood Stripper.

STEP 1   PREPARE

It is important for the user to determine the suitability of the CUTEK® Wood Reviver for its intended application. ALWAYS test product on a small test area prior to applying to any large sections. As the species and condition of wood can vary significantly, testing will enable you to accurately estimate the dilution, time and volume of CUTEK® Wood Reviver required to complete your project.

Safety and precautions:

Before you begin to Prepare and Protect your wood, note the hazards and precautions and ensure that you have obtained and know how to use the correct safety equipment as detailed in the Safety Data Sheet.

When using CUTEK® Wood Reviver, all adjacent surfaces and vegetation must be adequately protected. It is also important to be aware of the potential for wind drift into areas with cars or pedestrian traffic when rinsing. Water flush all equipment, vegetation, paths, concrete, asphalt and other adjacent surfaces before and after contact.

How to Apply:

CUTEK® Wood Reviver is a powerful wood restoring agent and can be used diluted or undiluted. Dilution and coverage can vary depending on the smoothness and density of your wood as well as the severity of staining and/or weathering. Always test to determine if your chosen dilution is effective in the restoration of your specific wood.

Coverage:

Spreading rate is approximately 1 US gal of CUTEK® Wood Reviver per 200-350 ft2 of surface area to be restored.

CUTEK® Wood Reviver is a powerful timber restoring agent and can be used diluted or undiluted. Coverage can vary depending on the smoothness and density of your wood as well as the severity of staining and/or weathering. Always test to determine if your chosen dilution is effective in the restoration of your specific wood.

Application:

Wet your wood prior to applying CUTEK® Wood Reviver. Apply CUTEK® Wood Reviver liberally to wetted wood with a brush, roller, broom or low-pressure garden sprayer.

Let CUTEK® Wood Reviver do the work by leaving it on the surface for 1 hour to 24 hours depending on the severity of staining or discoloration. It may be necessary to scrub stubborn stains moderately with a stiff fiber brush.

Removal:

Rinse off thoroughly, using a pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern. REMOVAL WITH A GARDEN HOSE IS NOT SUFFICIENT.
CAUTION must be used to avoid damage to the wood fiber and ‘furring up’. Adjust your cleaning process by reducing the pressure or your operating distance from the wood. DO NOT use “turbojets” on wood.

Rinse from the highest point and work down methodically using long even strokes in the direction of the grain, until there is minimal to no sudsing. The longer that CUTEK® Wood Reviver is left on the wood, the greater the rinse time required.

Note: certain types of wood surfaces may leave a raised grain effect after pressure washing is completed. Sanding or poly pad scrubbing may be required to smooth out this condition.

Clean Up:

Equipment may be cleaned with water. Ensure wash water is disposed in accordance with local regulations.

PROTECT WITH CUTEK® EXTREME

Following the restoration of your wood with CUTEK® Wood Reviver, it is important to complete the restoration process by protecting your wood with CUTEK® Extreme.

Designed for and proven to work in the harshest of American environments, CUTEK® Extreme penetrates and diffuses deeply into the wood core to protect against liquid and gas phase moisture and extend service life.

CUTEK® Extreme

  • High performance penetrating oil-based wood stabilizer with a unique self-healing effect that highlights the natural beauty of wood and controls moisture to improve dimensional stability and minimize cupping, warping and splitting.

Maintenance with CUTEK® Extreme is simple, easy and cost effective. Simply clean and recoat – no need to sand or strip.

Not protecting your wood with CUTEK® Extreme after cleaning will result in water damage and a faster weathering/graying process when exposed to the weather.

  • What steps should I follow when removing an existing coating?

    CUTEK® Extreme must be applied to bare, clean and dry wood. This allows the oil to freely penetrate/diffuse into your wood. Wood previously coated with a film forming product such as stains, linseed oil, paint, polyurethane, water-based oils, etc. can inhibit this penetration/diffusion and must be removed using the following steps:

    1. Remove the previous coating using CUTEK® Wood Stripper. It is safe, user-friendly and is suitable to remove multiple layers of most commonly used wood coatings.
    2. Restore the color and enhance the grain with CUTEK® Wood Reviver. CUTEK® Wood Reviver will bring weathered and stained wood back to life.

    After removing the previous coating, it is important to protect your exterior wood with CUTEK® Extreme to repel and displace moisture, and extend service life.

  • What is the difference between CUTEK® Quickclean and CUTEK® Wood Reviver?

    CUTEK® Quickclean is a powerful general purpose outdoor cleaner that removes dirt, grease and grime from outdoor surfaces. It is excellent to use to clean wood in preparation for a maintenance coat of CUTEK® Extreme.

    CUTEK® Wood Reviver is a wood restoration agent that restores stained, weathered and gray wood back to its original appearance. CUTEK® Wood Reviver is effective in removing stubborn stains caused by tannins, water, iron, resins, mold and fungus. It should be used for weathered wood, to remove stains from wood and/or to restore wood back to its original appearance. Typically, CUTEK® Wood Reviver is utilized to rejuvenate wood before the initial coat of CUTEK® Extreme is applied. It can also be used to prepare new wood for coating by removing common side effects of machining lumber such as “mill glaze” and excess extractives.

  • There are plenty of wood cleaners on the market, what makes CUTEK® Wood Reviver different?

    CUTEK® Wood Reviver is a commercial strength restoration agent with a thirty-year pedigree. Designed by professionals for professionals, it works quickly to remove heavy discoloration, graying, iron stains, water stains, mold stains etc. from all species of wood, while brightening the natural grain.  Unlike most DIY cleaners, CUTEK® Wood Reviver resists drying out on a hot day. It keeps working with a deep cleaning action, continuing the restoration process when others stop, without needing to keep the wood’s surface wet.

 

  • Why CUTEK® Wood Reviver

    FEATURES OF CUTEK® WOOD REVIVER

    • POWERFULLY RESTORES WOOD
      Brings weathered, grayed/silvered wood back to original appearance
    • REMOVES STUBBORN STAINS
      Such as iron stains, water marks, tannins, resins, mold and fungus
    • PREPARES NEW WOOD FOR COATING
      Removes common invisible glaze (‘mill glaze’) from newly sawn wood or machined wood

    TYPICAL USES

    • Restoration of stained or high traffic areas such as decks, docks, boardwalks, etc.
    • Rejuvenation of external and weather affected or grayed wood such as decking, cladding, fences, shingles, etc.

    CUTEK® Wood Reviver will not remove paint and wood coatings from your wood. In these instances, remove with CUTEK® Wood Stripper.

  • How To Apply

    STEP 1   PREPARE

    It is important for the user to determine the suitability of the CUTEK® Wood Reviver for its intended application. ALWAYS test product on a small test area prior to applying to any large sections. As the species and condition of wood can vary significantly, testing will enable you to accurately estimate the dilution, time and volume of CUTEK® Wood Reviver required to complete your project.

    Safety and precautions:

    Before you begin to Prepare and Protect your wood, note the hazards and precautions and ensure that you have obtained and know how to use the correct safety equipment as detailed in the Safety Data Sheet.

    When using CUTEK® Wood Reviver, all adjacent surfaces and vegetation must be adequately protected. It is also important to be aware of the potential for wind drift into areas with cars or pedestrian traffic when rinsing. Water flush all equipment, vegetation, paths, concrete, asphalt and other adjacent surfaces before and after contact.

    How to Apply:

    CUTEK® Wood Reviver is a powerful wood restoring agent and can be used diluted or undiluted. Dilution and coverage can vary depending on the smoothness and density of your wood as well as the severity of staining and/or weathering. Always test to determine if your chosen dilution is effective in the restoration of your specific wood.

    Coverage:

    Spreading rate is approximately 1 US gal of CUTEK® Wood Reviver per 200-350 ft2 of surface area to be restored.

    CUTEK® Wood Reviver is a powerful timber restoring agent and can be used diluted or undiluted. Coverage can vary depending on the smoothness and density of your wood as well as the severity of staining and/or weathering. Always test to determine if your chosen dilution is effective in the restoration of your specific wood.

    Application:

    Wet your wood prior to applying CUTEK® Wood Reviver. Apply CUTEK® Wood Reviver liberally to wetted wood with a brush, roller, broom or low-pressure garden sprayer.

    Let CUTEK® Wood Reviver do the work by leaving it on the surface for 1 hour to 24 hours depending on the severity of staining or discoloration. It may be necessary to scrub stubborn stains moderately with a stiff fiber brush.

    Removal:

    Rinse off thoroughly, using a pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern. REMOVAL WITH A GARDEN HOSE IS NOT SUFFICIENT.
    CAUTION must be used to avoid damage to the wood fiber and ‘furring up’. Adjust your cleaning process by reducing the pressure or your operating distance from the wood. DO NOT use “turbojets” on wood.

    Rinse from the highest point and work down methodically using long even strokes in the direction of the grain, until there is minimal to no sudsing. The longer that CUTEK® Wood Reviver is left on the wood, the greater the rinse time required.

    Note: certain types of wood surfaces may leave a raised grain effect after pressure washing is completed. Sanding or poly pad scrubbing may be required to smooth out this condition.

    Clean Up:

    Equipment may be cleaned with water. Ensure wash water is disposed in accordance with local regulations.

  • Protect with CUTEK® Extreme

    PROTECT WITH CUTEK® EXTREME

    Following the restoration of your wood with CUTEK® Wood Reviver, it is important to complete the restoration process by protecting your wood with CUTEK® Extreme.

    Designed for and proven to work in the harshest of American environments, CUTEK® Extreme penetrates and diffuses deeply into the wood core to protect against liquid and gas phase moisture and extend service life.

    CUTEK® Extreme

    • High performance penetrating oil-based wood stabilizer with a unique self-healing effect that highlights the natural beauty of wood and controls moisture to improve dimensional stability and minimize cupping, warping and splitting.

    Maintenance with CUTEK® Extreme is simple, easy and cost effective. Simply clean and recoat – no need to sand or strip.

    Not protecting your wood with CUTEK® Extreme after cleaning will result in water damage and a faster weathering/graying process when exposed to the weather.

  • FAQs
    • What steps should I follow when removing an existing coating?

      CUTEK® Extreme must be applied to bare, clean and dry wood. This allows the oil to freely penetrate/diffuse into your wood. Wood previously coated with a film forming product such as stains, linseed oil, paint, polyurethane, water-based oils, etc. can inhibit this penetration/diffusion and must be removed using the following steps:

      1. Remove the previous coating using CUTEK® Wood Stripper. It is safe, user-friendly and is suitable to remove multiple layers of most commonly used wood coatings.
      2. Restore the color and enhance the grain with CUTEK® Wood Reviver. CUTEK® Wood Reviver will bring weathered and stained wood back to life.

      After removing the previous coating, it is important to protect your exterior wood with CUTEK® Extreme to repel and displace moisture, and extend service life.

    • What is the difference between CUTEK® Quickclean and CUTEK® Wood Reviver?

      CUTEK® Quickclean is a powerful general purpose outdoor cleaner that removes dirt, grease and grime from outdoor surfaces. It is excellent to use to clean wood in preparation for a maintenance coat of CUTEK® Extreme.

      CUTEK® Wood Reviver is a wood restoration agent that restores stained, weathered and gray wood back to its original appearance. CUTEK® Wood Reviver is effective in removing stubborn stains caused by tannins, water, iron, resins, mold and fungus. It should be used for weathered wood, to remove stains from wood and/or to restore wood back to its original appearance. Typically, CUTEK® Wood Reviver is utilized to rejuvenate wood before the initial coat of CUTEK® Extreme is applied. It can also be used to prepare new wood for coating by removing common side effects of machining lumber such as “mill glaze” and excess extractives.

    • There are plenty of wood cleaners on the market, what makes CUTEK® Wood Reviver different?

      CUTEK® Wood Reviver is a commercial strength restoration agent with a thirty-year pedigree. Designed by professionals for professionals, it works quickly to remove heavy discoloration, graying, iron stains, water stains, mold stains etc. from all species of wood, while brightening the natural grain.  Unlike most DIY cleaners, CUTEK® Wood Reviver resists drying out on a hot day. It keeps working with a deep cleaning action, continuing the restoration process when others stop, without needing to keep the wood’s surface wet.

  • Technical Info
  • Videos